Home
Up

CERTIFIED PROPS

PROPS

        The props are manufactured with high resistence steel tubing. The steel (ST- 44.3) complys with DIN 17100 and UNE / EN / 10025 standards. The basis with strengtened with metalic tongues. Prop it´s self is furnace painted with epoxi paint and antirust phosphatized treatment. The props are tested under comppressing by the "Instituto Eduardo Torroja de la Construcción". They are manufactured in three series: Light, European and Special.

        If necessary we will present  you a copy of the certificate to certify that the props comply with all required regulations, in order to avoid problems with law enforcement. 

        With 12 models they cover all loads and measurements, created in the construction, from light models (serie N), to European models (serie S) wich are much more reinforced all the way up to the Special models (serie E).

       

MODELS SIZES 
P1 0.55 - 1.00m.
P1.7 0.95 - 1.77m.
P3 1.65 - 3.06m.
P3.6 2.10 - 3.60m.
P4 2.10 - 4.05m.
P5 3.21 - 5.10m.

 

Specifications 

TYPE

SÉRIE NORMAL

NORMAL USE

   Ø 48   -   Ø 40mm.     P1N - P1.7N - P3N - P3F

 P3.6N - P4N

SÉRIE EUROPA

 

   Ø 55   -   Ø 48mm.  P3S - P3.6S - P4S - P5S
SÉRIE ESPECIAL

SPECIAL CONSTRUCTIONS 

   Ø 60   -   Ø 52mm.  P3E - P3.6E - P4E - P5E

         Data obtained from tests about exhaustion loads for new props, leaden and with centred vertical loads. For loads in use, it is advisable to work with a minimum safety coefficient of 2 or 2,5.

 

For more information or catalogues please contact us.

 

ANTÓNIO & JOÃO and the logo are registered trademarks of ANTÓNIO & JOÃO, LDA